Levoite™ Honing Guide Chisel Sharpening Jig Chisel Honing Guide Sharpening Wood Chisels sharpening System
Levoite Latest Design premium honing guide sled allows for fast, consistent and accurate honing of wood chisels and plane irons. Precision CNC machined from aircraft grade aluminium the sliding carriage glides back and forth on a stainless steel bar, that travels through a housing which features 50 micro ball-bearings. These micro bearings ensure a smooth, effortless movement with no lateral play, allowing for consistent longitudinal movement over the length of the sharpening stone.
Premium Honing Guide Sled
Super smooth moment, well thought out engineering. Makes sharpening uniformed consistently.What a wonderfully engineered well thought out piece of kit ! This will not only speed up your sharpening process but take a lot of the guess work out of it too. The engineering looks and feels robust and sturdy and finished well!
The head uses a clamping bar that registers on the face of the blade and accepts flat and tapered blades up to 7mm thick and 52mm wide. Comes with additional M6x30mm screws, to clamp up to 22m thickness.A series of parallel lines are etched onto the head to ensure the chisel or plane iron sits square to the jig. You can lock-off the head at your desired honing angle anywhere from 10-60° using an Allen key or as favoured by most, you can leave the head unlocked and simply copy the existing angle of the blade edge. The base of the jig accepts water stones from 180mm to 220mm in length and up to 80mm in width, held in position using the aluminium clamping block. Beautifully made from CNC machined aluminium combined with solid brass knurl screws this jig sits on four brass feet with rubber sole pads that prevent the sled from walking when sharpening.
This sled, unlike a traditional hand held honing guide eliminates any lateral or longitudinal play, allowing the blade to smoothly, consistently and accurately move over the sharpening stone. The sharpening sled has a lifetime warranty and in the event that it fails due to a material or manufacturing defect will be replaced free of charge.
-
Lifetime Warranty
If any sharpening sled fails due to a material or manufacturing defect it will be replaced free of charge -
Premium Honing Guide Sled
Allows for fast, consistent and accurate honing of wood chisels and plane irons
-
Precision CNC Machined from Aircraft Grade Aluminium
Combined with solid brass knurl adjustment screws -
Sliding Carriage Glides Smoothly Back and Forth
Effortless movement with no lateral play, allowing for consistent longitudinal movement
-
Head Clamping Bar Registers on the Face of the Blade
Accepts flat and tapered blades up to 7mm thick and 52mm wide,Comes with additional M6x30mm screws, to clamp up to 22mm thickness -
Series of Parallel Lines are Etched onto the Head
To ensure the chisel or plane iron sits square to the jig
-
Series of Parallel Lines are Etched onto the Head
To ensure the chisel or plane iron sits square to the jig - The jig can accept stones with the following capacity Stone Length Capacity : 183 - 220mm Stone Width Capacity: 0 - 80mm Stone Thickness Capacity 0 - 30mm
- Lock-Off the Head at Your Desired Honing Angle Anywhere from 10-60°Alternatively leave the head unlocked to copy the existing angle of the blade edge
- Unlike a Traditional Hand Held Honing GuideEliminates lateral or longitudinal play, allowing the blade to smoothly and consistently move over the sharpening stone
Wow what a product, if only I knew this existed years ago it would have saved so much time compared to setting up manual honing guides. All you have to do is insert the chisel into the holder ( tip - the length inserted determines the sharpening angle ) and sharpen. Very easy to switch between grits of stone while the blades is clamped which means you can return to the same sharpening angle.
